80 mm x 170 mm x 39 mm skf 6316 bearing

d:10 mm; D:26 mm; Characteristic outer ring frequency, BPF0:2.56 Hz; Nlim (grease):21,000 rpm; Fatigue limit load, Cu:0.09 kN; da max:13.5 mm; Characteristic cage frequency, FTF:0.37 Hz; ra max:0.3 mm; rs min:0.3 mm; Brand:NTN;

C Chamfered:Provided; Type:Bearings with Housin; Housing Material:[Aluminum Alloy] Alu; Bearing I.D. d(mm):12; Width T(mm):10; Lateral Width L(mm):53; Seals:VV (Non-Contact Rubb; Days to Ship:8 Days; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea;

A5:25.4 mm; L:129 mm; H1:89 mm; SW:3.97 mm; N1:16 mm; T max.:100 °C; N:22mm; Weight:1.61 kg; L2:13 mm; H:102 mm;

L:115 mm; G:M6x1; B:51.6 mm; T min.:-20 °C; N:15mm; Designation of housing:FA210N-; Weight:2.2 kg; A1:18 mm; s1:25.8 mm; S:19 mm;

Bearing Retained:Yes (with retaining; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; Bearing Part Number:628; Bearing I.D. d(mm):8; Seals:ZZ (Double Shield); Width T(mm):15; Bearing Used:Deep Groove Ball Be

UNSPSC:31171547; F:77 mm; Mass (without HJ ring):1.92 kg; Characteristic rolling element frequency, BSF:5.09 Hz; Weight / Kilogram:1.868; EAN:4547359151626; Category:Cylindrical Roller B; Snap Ring:No; Dc max:111 mm; Da max:119 mm;

Days to Ship:7 Days; Type:Bearings with Housin; Number of Bearings:Double; Shape:Flanged Pilot Type; RoHS:6; Width T(mm):20 ～ 50; Housing Material:1045 Carbon Steel; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:608;

EAN:4547359541540; Minimum Buy Quantity:N/A; Mass:0.47 kg; Min operating temperature, Tmin:-40 °C; Brand:NTN; fillet radius:0.13 in; Weight / US pound:0.01; D:104.78 mm; r1a max:3.3 mm; material:Case Carburized Stee;

L1:42 mm; L:127 mm; Weight:0.71 kg; A:38 mm; s1:15.5 mm; H:33.3 mm; H1:15 mm; B:31 mm; T max.:100 °C; J:95 mm;

Grease Type:Standard Grease; Bearing Unit, Type:Take-Up Type; Surface Treatment:No; Unit, Type:Insert Bearing Unit; Unit Body Material:Cast Iron; Unit Body Material:Cast Iron; Accessory:With steel plate cov; Machining:No; Seal:Triple seals; Bearing Inner Dia. Shape:Cylindrical Bore Set;

Material:[Steel] Low Carbon S; Shape:Square; Days to Ship:6 Days; Surface Treatment:Surface Treatment Pr; Volume Discount:Available; Type:Lock Nuts; Screw Type:Metric (Fine) Thread; Volume Discount:Available; Thread Nominal M(mm):M3×0.35; Type:Lock Nuts;

Shape:Bottom Mount; Bearing Retained:No; Bearing Material:Steel; RoHS:6; Height H(inch):1; Seals:ZZ (Double Shield); Number of Bearings:Double; Seals:ZZ (Double Shield); Bearing Material:Steel; Bearing Used:Deep Groove Ball Bea;

Number of Bearings:Single; Bearing I.D. d(mm):8; Type:Bearings with Housin; C Chamfered:Not Provided; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Days to Ship:8 Days; Shape:T-Shaped; Shape:T-Shaped; Lateral Width L(mm):56;

Symbol of Bearing Ring Shape:No symbol: Internal; Rolling Element Material:Steel; Cylinder shape (suffix symbol: X):X (cylinder outer di; Specifications:Standard; Raceway Ring Shape:Cylindrical Roller; Raceway Ring Shape:Cylindrical Roller; d:55; Inner/Outer Ring Material:Steel; Internal Clearance S

Bearing Used:Deep Groove Ball Bea; Width T(mm):50 ～ 120; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Flange O.D. H(φ):114; RoHS:6; Bearing Material:[Steel] Steel; Holder Surface Treatment:Black Oxide Coating; Bearing Part Number:6008; Flange Shape:Round Type;